AF

Twaron® 1000 3360 dtex 2000

Teijin Aramid ? High Tenacity

Manufacturer page / TDS

Description

Para-aramid continuous filament yarn; grade selected by tenacity, modulus, finish and color.

Comparative overview

Aramid fiber — Ballistic / high-tenacity para-aramid

Strengths: Excellent specific tensile strength, toughness and energy absorption; fibers spread and dissipate impact energy while remaining dielectric and flame resistant.

When to use: Select for soft/hard armor, helmets, fragment protection, ropes, impact skins and hybrid laminates where toughness matters more than compression stiffness.

Key tradeoffs: Low compressive strength, moisture uptake, UV sensitivity and difficult machining/bonding; carbon is better for pure stiffness.

Qualitative ratings (1–10 scale)

Relative cost8/10 — High — ballistic-grade para-aramid requires controlled spinning, yarn and finish quality.
EM transparency9/10 — Excellent — dielectric organic fiber suitable for RF-transparent structures when the matrix and moisture state are controlled.
Temperature / fire resistance6/10 — Good — flame resistant and non-melting, but organic decomposition limits sustained hot-section use.
Impact / penetration resistance10/10 — Top-tier — proven high-velocity penetration resistance and energy dissipation in soft and hard armor. Stored TDS elongation: 3.7%.
Electrical / thermal conductivity1/10 — Very low — electrically insulating with very low thermal transport.
Specific tensile strength7/10 — 7/10 | 2013.9 kN·m/kg | Product TDS
Atmospheric durability5/10 — Moderate — good chemical durability and no corrosion, but para-aramids require UV protection; humidity and the fiber–matrix interface can affect retained performance.
Sustainability (CO₂e)6/10 — 8.70 kg CO₂e/kg fiber — Medium emissions — data quality: High

Technical properties

Tensile strength2900.0 MPa
Tensile modulus67.0 GPa
Density1.44 g/cm³

Applications and processing

Ballistic protectionoptical and power cablesropestires and structural reinforcementBallisticscablesropesrubber reinforcement and composites

Other grades from Teijin Aramid